ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('13-28_SW0001','2010-06-04T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#10744=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#10745=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#10746=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#10745);
#10747=(CONVERSION_BASED_UNIT('INCH',#10746)LENGTH_UNIT()NAMED_UNIT(#10744));
#10748=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#10749=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#10750=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #10749);
#10751=(CONVERSION_BASED_UNIT('DEGREE',#10750)NAMED_UNIT(#10748)PLANE_ANGLE_UNIT());
#10752=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#10753=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.840175879282E-5),#10747, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#10754=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #10753))GLOBAL_UNIT_ASSIGNED_CONTEXT((#10747,#10751,#10752))REPRESENTATION_CONTEXT('ID1','3'));
#10756=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#10757=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#10756);
#10758=DESIGN_CONTEXT('',#10756,'design');
#10759=MECHANICAL_CONTEXT('',#10756,'mechanical');
#10760=PRODUCT('13-28_SW0001','13-28_SW0001','NOT SPECIFIED',(#10759));
#10761=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #10760,.MADE.);
#10765=PRODUCT_CATEGORY('part','');
#10766=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#10760));
#10762=PRODUCT_DEFINITION('design','',#10761,#10758);
#10763=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 13-28_SW0001.',#10762);
ENDSEC;
END-ISO-10303-21;