ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('22-36_WEB','2010-08-20T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#16082=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#16083=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#16084=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#16083);
#16085=(CONVERSION_BASED_UNIT('INCH',#16084)LENGTH_UNIT()NAMED_UNIT(#16082));
#16086=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#16087=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#16088=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #16087);
#16089=(CONVERSION_BASED_UNIT('DEGREE',#16088)NAMED_UNIT(#16086)PLANE_ANGLE_UNIT());
#16090=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#16091=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.353327356772E-4),#16085, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#16092=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #16091))GLOBAL_UNIT_ASSIGNED_CONTEXT((#16085,#16089,#16090))REPRESENTATION_CONTEXT('ID1','3'));
#16094=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#16095=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#16094);
#16096=DESIGN_CONTEXT('',#16094,'design');
#16097=MECHANICAL_CONTEXT('',#16094,'mechanical');
#16098=PRODUCT('22-36_WEB','22-36_WEB','NOT SPECIFIED',(#16097));
#16099=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #16098,.MADE.);
#16103=PRODUCT_CATEGORY('part','');
#16104=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#16098));
#16100=PRODUCT_DEFINITION('design','',#16099,#16096);
#16101=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 22-36_WEB.',#16100);
ENDSEC;
END-ISO-10303-21;