ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('22-40_WEB','2010-08-23T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#16178=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#16179=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#16180=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#16179);
#16181=(CONVERSION_BASED_UNIT('INCH',#16180)LENGTH_UNIT()NAMED_UNIT(#16178));
#16182=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#16183=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#16184=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #16183);
#16185=(CONVERSION_BASED_UNIT('DEGREE',#16184)NAMED_UNIT(#16182)PLANE_ANGLE_UNIT());
#16186=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#16187=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.828804400916E-4),#16181, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#16188=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #16187))GLOBAL_UNIT_ASSIGNED_CONTEXT((#16181,#16185,#16186))REPRESENTATION_CONTEXT('ID1','3'));
#16190=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#16191=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#16190);
#16192=DESIGN_CONTEXT('',#16190,'design');
#16193=MECHANICAL_CONTEXT('',#16190,'mechanical');
#16194=PRODUCT('22-40_WEB','22-40_WEB','NOT SPECIFIED',(#16193));
#16195=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #16194,.MADE.);
#16199=PRODUCT_CATEGORY('part','');
#16200=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#16194));
#16196=PRODUCT_DEFINITION('design','',#16195,#16192);
#16197=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 22-40_WEB.',#16196);
ENDSEC;
END-ISO-10303-21;