ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('50622','2020-12-11T10:21:32',(''),(''), 'CREO PARAMETRIC BY PTC INC, 2018400','CREO PARAMETRIC BY PTC INC, 2018400','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#7730=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#7732=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#7731);
#7733=(CONVERSION_BASED_UNIT('INCH',#7732)LENGTH_UNIT()NAMED_UNIT(#7730));
#7736=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #7735);
#7737=(CONVERSION_BASED_UNIT('DEGREE',#7736)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#7739=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(8.353579382818E-4),#7733, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#7740=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #7739))GLOBAL_UNIT_ASSIGNED_CONTEXT((#7733,#7737,#7738))REPRESENTATION_CONTEXT( 'ID1','3'));
#7742=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#7743=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#7742);
#7744=DESIGN_CONTEXT('',#7742,'design');
#7745=MECHANICAL_CONTEXT('',#7742,'mechanical');
#7746=PRODUCT('50622','50622','NOT SPECIFIED',(#7745));
#7747=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #7746,.MADE.);
#7751=PRODUCT_CATEGORY('part','');
#7752=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#7746));
#7731=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#7735=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#7738=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#7748=PRODUCT_DEFINITION('design','',#7747,#7744);
#7749=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 50622.',#7748);
ENDSEC;
END-ISO-10303-21;