ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('286_WEB','2010-11-08T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#26511=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#26512=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#26513=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#26512);
#26514=(CONVERSION_BASED_UNIT('INCH',#26513)LENGTH_UNIT()NAMED_UNIT(#26511));
#26515=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#26516=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#26517=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #26516);
#26518=(CONVERSION_BASED_UNIT('DEGREE',#26517)NAMED_UNIT(#26515)PLANE_ANGLE_UNIT());
#26519=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#26520=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.804050730128E-5),#26514, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#26521=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #26520))GLOBAL_UNIT_ASSIGNED_CONTEXT((#26514,#26518,#26519))REPRESENTATION_CONTEXT('ID1','3'));
#26523=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#26524=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#26523);
#26525=DESIGN_CONTEXT('',#26523,'design');
#26526=MECHANICAL_CONTEXT('',#26523,'mechanical');
#26527=PRODUCT('286_WEB','286_WEB','NOT SPECIFIED',(#26526));
#26528=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #26527,.MADE.);
#26532=PRODUCT_CATEGORY('part','');
#26533=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#26527));
#26529=PRODUCT_DEFINITION('design','',#26528,#26525);
#26530=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 286_WEB.',#26529);
ENDSEC;
END-ISO-10303-21;