ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('289-1_WEB','2010-11-18T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#16113=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#16114=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#16115=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#16114);
#16116=(CONVERSION_BASED_UNIT('INCH',#16115)LENGTH_UNIT()NAMED_UNIT(#16113));
#16117=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#16118=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#16119=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #16118);
#16120=(CONVERSION_BASED_UNIT('DEGREE',#16119)NAMED_UNIT(#16117)PLANE_ANGLE_UNIT());
#16121=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#16122=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.477971263697E-4),#16116, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#16123=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #16122))GLOBAL_UNIT_ASSIGNED_CONTEXT((#16116,#16120,#16121))REPRESENTATION_CONTEXT('ID1','3'));
#16125=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#16126=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#16125);
#16127=DESIGN_CONTEXT('',#16125,'design');
#16128=MECHANICAL_CONTEXT('',#16125,'mechanical');
#16129=PRODUCT('289-1_WEB','289-1_WEB','NOT SPECIFIED',(#16128));
#16130=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #16129,.MADE.);
#16134=PRODUCT_CATEGORY('part','');
#16135=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#16129));
#16131=PRODUCT_DEFINITION('design','',#16130,#16127);
#16132=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 289-1_WEB.',#16131);
ENDSEC;
END-ISO-10303-21;