ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('289-10_SW0001','2011-07-15T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#26553=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#26554=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#26555=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#26554);
#26556=(CONVERSION_BASED_UNIT('INCH',#26555)LENGTH_UNIT()NAMED_UNIT(#26553));
#26557=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#26558=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#26559=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #26558);
#26560=(CONVERSION_BASED_UNIT('DEGREE',#26559)NAMED_UNIT(#26557)PLANE_ANGLE_UNIT());
#26561=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#26562=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.936555627384E-4),#26556, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#26563=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #26562))GLOBAL_UNIT_ASSIGNED_CONTEXT((#26556,#26560,#26561))REPRESENTATION_CONTEXT('ID1','3'));
#26565=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#26566=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#26565);
#26567=DESIGN_CONTEXT('',#26565,'design');
#26568=MECHANICAL_CONTEXT('',#26565,'mechanical');
#26569=PRODUCT('289-10_SW0001','289-10_SW0001','NOT SPECIFIED',(#26568));
#26570=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #26569,.MADE.);
#26574=PRODUCT_CATEGORY('part','');
#26575=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#26569));
#26571=PRODUCT_DEFINITION('design','',#26570,#26567);
#26572=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 289-10_SW0001.',#26571);
ENDSEC;
END-ISO-10303-21;