ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('289-2_WEB','2010-11-18T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#34603=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#34604=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#34605=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#34604);
#34606=(CONVERSION_BASED_UNIT('INCH',#34605)LENGTH_UNIT()NAMED_UNIT(#34603));
#34607=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#34608=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#34609=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #34608);
#34610=(CONVERSION_BASED_UNIT('DEGREE',#34609)NAMED_UNIT(#34607)PLANE_ANGLE_UNIT());
#34611=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#34612=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.477971263697E-4),#34606, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#34613=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #34612))GLOBAL_UNIT_ASSIGNED_CONTEXT((#34606,#34610,#34611))REPRESENTATION_CONTEXT('ID1','3'));
#34615=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#34616=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#34615);
#34617=DESIGN_CONTEXT('',#34615,'design');
#34618=MECHANICAL_CONTEXT('',#34615,'mechanical');
#34619=PRODUCT('289-2_WEB','289-2_WEB','NOT SPECIFIED',(#34618));
#34620=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('2','LAST_VERSION', #34619,.MADE.);
#34624=PRODUCT_CATEGORY('part','');
#34625=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#34619));
#34621=PRODUCT_DEFINITION('design','',#34620,#34617);
#34622=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 289-2_WEB.',#34621);
ENDSEC;
END-ISO-10303-21;