ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('289-3_WEB','2010-11-18T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#15743=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#15744=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#15745=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#15744);
#15746=(CONVERSION_BASED_UNIT('INCH',#15745)LENGTH_UNIT()NAMED_UNIT(#15743));
#15747=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#15748=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#15749=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #15748);
#15750=(CONVERSION_BASED_UNIT('DEGREE',#15749)NAMED_UNIT(#15747)PLANE_ANGLE_UNIT());
#15751=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#15752=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.477971263697E-4),#15746, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#15753=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #15752))GLOBAL_UNIT_ASSIGNED_CONTEXT((#15746,#15750,#15751))REPRESENTATION_CONTEXT('ID1','3'));
#15755=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#15756=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#15755);
#15757=DESIGN_CONTEXT('',#15755,'design');
#15758=MECHANICAL_CONTEXT('',#15755,'mechanical');
#15759=PRODUCT('289-3_WEB','289-3_WEB','NOT SPECIFIED',(#15758));
#15760=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('2','LAST_VERSION', #15759,.MADE.);
#15764=PRODUCT_CATEGORY('part','');
#15765=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#15759));
#15761=PRODUCT_DEFINITION('design','',#15760,#15757);
#15762=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 289-3_WEB.',#15761);
ENDSEC;
END-ISO-10303-21;