ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('289-8_SW0001','2011-07-13T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#31218=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#31219=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#31220=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#31219);
#31221=(CONVERSION_BASED_UNIT('INCH',#31220)LENGTH_UNIT()NAMED_UNIT(#31218));
#31222=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#31223=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#31224=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #31223);
#31225=(CONVERSION_BASED_UNIT('DEGREE',#31224)NAMED_UNIT(#31222)PLANE_ANGLE_UNIT());
#31226=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#31227=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.936555627384E-4),#31221, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#31228=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #31227))GLOBAL_UNIT_ASSIGNED_CONTEXT((#31221,#31225,#31226))REPRESENTATION_CONTEXT('ID1','3'));
#31230=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#31231=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#31230);
#31232=DESIGN_CONTEXT('',#31230,'design');
#31233=MECHANICAL_CONTEXT('',#31230,'mechanical');
#31234=PRODUCT('289-8_SW0001','289-8_SW0001','NOT SPECIFIED',(#31233));
#31235=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #31234,.MADE.);
#31239=PRODUCT_CATEGORY('part','');
#31240=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#31234));
#31236=PRODUCT_DEFINITION('design','',#31235,#31232);
#31237=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 289-8_SW0001.',#31236);
ENDSEC;
END-ISO-10303-21;