ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('289-9_WEB','2011-07-06T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#2434=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2435=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2436=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#2435);
#2437=(CONVERSION_BASED_UNIT('INCH',#2436)LENGTH_UNIT()NAMED_UNIT(#2434));
#2438=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2439=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2440=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #2439);
#2441=(CONVERSION_BASED_UNIT('DEGREE',#2440)NAMED_UNIT(#2438)PLANE_ANGLE_UNIT( ));
#2442=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2443=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.244325514733E-4),#2437, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#2444=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #2443))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2437,#2441,#2442))REPRESENTATION_CONTEXT( 'ID1','3'));
#2446=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#2447=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#2446);
#2448=DESIGN_CONTEXT('',#2446,'design');
#2449=MECHANICAL_CONTEXT('',#2446,'mechanical');
#2450=PRODUCT('289-9_WEB','289-9_WEB','NOT SPECIFIED',(#2449));
#2451=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #2450,.MADE.);
#2455=PRODUCT_CATEGORY('part','');
#2456=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#2450));
#2452=PRODUCT_DEFINITION('design','',#2451,#2448);
#2453=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 289-9_WEB.',#2452);
ENDSEC;
END-ISO-10303-21;