ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('289_SW0001','2010-11-16T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#8320=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#8321=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#8322=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#8321);
#8323=(CONVERSION_BASED_UNIT('INCH',#8322)LENGTH_UNIT()NAMED_UNIT(#8320));
#8324=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#8325=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#8326=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #8325);
#8327=(CONVERSION_BASED_UNIT('DEGREE',#8326)NAMED_UNIT(#8324)PLANE_ANGLE_UNIT( ));
#8328=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#8329=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.099981621142E-4),#8323, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#8330=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #8329))GLOBAL_UNIT_ASSIGNED_CONTEXT((#8323,#8327,#8328))REPRESENTATION_CONTEXT( 'ID1','3'));
#8332=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#8333=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#8332);
#8334=DESIGN_CONTEXT('',#8332,'design');
#8335=MECHANICAL_CONTEXT('',#8332,'mechanical');
#8336=PRODUCT('289_SW0001','289_SW0001','NOT SPECIFIED',(#8335));
#8337=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #8336,.MADE.);
#8341=PRODUCT_CATEGORY('part','');
#8342=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#8336));
#8338=PRODUCT_DEFINITION('design','',#8337,#8334);
#8339=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 289_SW0001.',#8338);
ENDSEC;
END-ISO-10303-21;