ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('297-1_WEB','2011-07-13T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#4626=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#4627=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#4628=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#4627);
#4629=(CONVERSION_BASED_UNIT('INCH',#4628)LENGTH_UNIT()NAMED_UNIT(#4626));
#4630=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#4631=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#4632=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #4631);
#4633=(CONVERSION_BASED_UNIT('DEGREE',#4632)NAMED_UNIT(#4630)PLANE_ANGLE_UNIT( ));
#4634=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#4635=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.456959948885E-4),#4629, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#4636=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #4635))GLOBAL_UNIT_ASSIGNED_CONTEXT((#4629,#4633,#4634))REPRESENTATION_CONTEXT( 'ID1','3'));
#4638=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#4639=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#4638);
#4640=DESIGN_CONTEXT('',#4638,'design');
#4641=MECHANICAL_CONTEXT('',#4638,'mechanical');
#4642=PRODUCT('297-1_WEB','297-1_WEB','NOT SPECIFIED',(#4641));
#4643=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #4642,.MADE.);
#4647=PRODUCT_CATEGORY('part','');
#4648=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#4642));
#4644=PRODUCT_DEFINITION('design','',#4643,#4640);
#4645=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 297-1_WEB.',#4644);
ENDSEC;
END-ISO-10303-21;