ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('3-159','2020-12-30T13:26:50',(''),(''), 'CREO PARAMETRIC BY PTC INC, 2018400','CREO PARAMETRIC BY PTC INC, 2018400','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#38027=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#38029=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#38028);
#38030=(CONVERSION_BASED_UNIT('INCH',#38029)LENGTH_UNIT()NAMED_UNIT(#38027));
#38033=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #38032);
#38034=(CONVERSION_BASED_UNIT('DEGREE',#38033)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#38036=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.912248017685E-5),#38030, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#38037=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #38036))GLOBAL_UNIT_ASSIGNED_CONTEXT((#38030,#38034,#38035))REPRESENTATION_CONTEXT('ID1','3'));
#38039=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#38040=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#38039);
#38041=DESIGN_CONTEXT('',#38039,'design');
#38042=MECHANICAL_CONTEXT('',#38039,'mechanical');
#38043=PRODUCT('3-159','3-159','NOT SPECIFIED',(#38042));
#38044=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #38043,.MADE.);
#38048=PRODUCT_CATEGORY('part','');
#38049=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#38043));
#38028=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#38032=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#38035=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#38045=PRODUCT_DEFINITION('design','',#38044,#38041);
#38046=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 3-159.',#38045);
ENDSEC;
END-ISO-10303-21;