ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('3-1681_WEB','2010-10-29T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#38982=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#38983=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#38984=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#38983);
#38985=(CONVERSION_BASED_UNIT('INCH',#38984)LENGTH_UNIT()NAMED_UNIT(#38982));
#38986=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#38987=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#38988=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #38987);
#38989=(CONVERSION_BASED_UNIT('DEGREE',#38988)NAMED_UNIT(#38986)PLANE_ANGLE_UNIT());
#38990=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#38991=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.187724617290E-4),#38985, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#38992=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #38991))GLOBAL_UNIT_ASSIGNED_CONTEXT((#38985,#38989,#38990))REPRESENTATION_CONTEXT('ID1','3'));
#38994=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#38995=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#38994);
#38996=DESIGN_CONTEXT('',#38994,'design');
#38997=MECHANICAL_CONTEXT('',#38994,'mechanical');
#38998=PRODUCT('3-1681_WEB','3-1681_WEB','NOT SPECIFIED',(#38997));
#38999=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #38998,.MADE.);
#39003=PRODUCT_CATEGORY('part','');
#39004=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#38998));
#39000=PRODUCT_DEFINITION('design','',#38999,#38996);
#39001=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 3-1681_WEB.',#39000);
ENDSEC;
END-ISO-10303-21;