ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('3-423_WEB','2011-07-08T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#15392=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#15393=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#15394=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#15393);
#15395=(CONVERSION_BASED_UNIT('INCH',#15394)LENGTH_UNIT()NAMED_UNIT(#15392));
#15396=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#15397=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#15398=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #15397);
#15399=(CONVERSION_BASED_UNIT('DEGREE',#15398)NAMED_UNIT(#15396)PLANE_ANGLE_UNIT());
#15400=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#15401=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.162345692445E-5),#15395, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#15402=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #15401))GLOBAL_UNIT_ASSIGNED_CONTEXT((#15395,#15399,#15400))REPRESENTATION_CONTEXT('ID1','3'));
#15404=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#15405=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#15404);
#15406=DESIGN_CONTEXT('',#15404,'design');
#15407=MECHANICAL_CONTEXT('',#15404,'mechanical');
#15408=PRODUCT('3-423_WEB','3-423_WEB','NOT SPECIFIED',(#15407));
#15409=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #15408,.MADE.);
#15413=PRODUCT_CATEGORY('part','');
#15414=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#15408));
#15410=PRODUCT_DEFINITION('design','',#15409,#15406);
#15411=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 3-423_WEB.',#15410);
ENDSEC;
END-ISO-10303-21;