ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('4-2542BP_WEB','2011-07-06T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#4767=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#4768=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#4769=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#4768);
#4770=(CONVERSION_BASED_UNIT('INCH',#4769)LENGTH_UNIT()NAMED_UNIT(#4767));
#4771=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#4772=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#4773=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #4772);
#4774=(CONVERSION_BASED_UNIT('DEGREE',#4773)NAMED_UNIT(#4771)PLANE_ANGLE_UNIT( ));
#4775=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#4776=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(9.027730405448E-4),#4770, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#4777=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #4776))GLOBAL_UNIT_ASSIGNED_CONTEXT((#4770,#4774,#4775))REPRESENTATION_CONTEXT( 'ID1','3'));
#4779=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#4780=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#4779);
#4781=DESIGN_CONTEXT('',#4779,'design');
#4782=MECHANICAL_CONTEXT('',#4779,'mechanical');
#4783=PRODUCT('4-2542BP_WEB','4-2542BP_WEB','NOT SPECIFIED',(#4782));
#4784=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #4783,.MADE.);
#4788=PRODUCT_CATEGORY('part','');
#4789=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#4783));
#4785=PRODUCT_DEFINITION('design','',#4784,#4781);
#4786=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 4-2542BP_WEB.',#4785);
ENDSEC;
END-ISO-10303-21;