ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('7301_WEB','2010-12-07T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009300','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#126150=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#126151=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#126152=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#126151);
#126153=(CONVERSION_BASED_UNIT('INCH',#126152)LENGTH_UNIT()NAMED_UNIT(#126150));
#126154=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#126155=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#126156=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #126155);
#126157=(CONVERSION_BASED_UNIT('DEGREE',#126156)NAMED_UNIT(#126154)PLANE_ANGLE_UNIT());
#126158=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#126159=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.859051674243E-3),#126153, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#126160=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#126159))GLOBAL_UNIT_ASSIGNED_CONTEXT((#126153,#126157,#126158))REPRESENTATION_CONTEXT('ID1','3'));
#126170=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#126171=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#126170);
#126172=DESIGN_CONTEXT('',#126170,'design');
#126173=MECHANICAL_CONTEXT('',#126170,'mechanical');
#126174=PRODUCT('7301_WEB','7301_WEB','NOT SPECIFIED',(#126173));
#126175=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #126174,.MADE.);
#126179=PRODUCT_CATEGORY('part','');
#126180=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#126174));
#126176=PRODUCT_DEFINITION('design','',#126175,#126172);
#126177=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 7301_WEB.',#126176);
ENDSEC;
END-ISO-10303-21;