ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('889','2021-01-25T13:30:40',(''),(''), 'CREO PARAMETRIC BY PTC INC, 2018400','CREO PARAMETRIC BY PTC INC, 2018400','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#98308=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#98310=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#98309);
#98311=(CONVERSION_BASED_UNIT('INCH',#98310)LENGTH_UNIT()NAMED_UNIT(#98308));
#98314=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #98313);
#98315=(CONVERSION_BASED_UNIT('DEGREE',#98314)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#98317=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.500321012128E-5),#98311, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#98318=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #98317))GLOBAL_UNIT_ASSIGNED_CONTEXT((#98311,#98315,#98316))REPRESENTATION_CONTEXT('ID1','3'));
#98320=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#98321=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#98320);
#98322=DESIGN_CONTEXT('',#98320,'design');
#98323=MECHANICAL_CONTEXT('',#98320,'mechanical');
#98324=PRODUCT('889','889','NOT SPECIFIED',(#98323));
#98325=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #98324,.MADE.);
#98329=PRODUCT_CATEGORY('part','');
#98330=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#98324));
#98309=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#98313=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#98316=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#98326=PRODUCT_DEFINITION('design','',#98325,#98322);
#98327=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 889.',#98326);
ENDSEC;
END-ISO-10303-21;