ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('30-130','2025-10-01T23:17:03',(''),(''), 'CREO PARAMETRIC BY PTC INC, 2025093','CREO PARAMETRIC BY PTC INC, 2025093','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#742709=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#742711=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#742710);
#742712=(CONVERSION_BASED_UNIT('INCH',#742711)LENGTH_UNIT()NAMED_UNIT(#742709));
#742715=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #742714);
#742716=(CONVERSION_BASED_UNIT('DEGREE',#742715)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#742718=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.092630993003E-4),#742712, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#742719=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#742718))GLOBAL_UNIT_ASSIGNED_CONTEXT((#742712,#742716,#742717))REPRESENTATION_CONTEXT('ID1','3'));
#742721=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#742722=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#742721);
#742723=DESIGN_CONTEXT('',#742721,'design');
#742724=MECHANICAL_CONTEXT('',#742721,'mechanical');
#742725=PRODUCT('30-130','30-130','NOT SPECIFIED',(#742724));
#742726=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #742725,.MADE.);
#742730=PRODUCT_CATEGORY('part','');
#742731=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#742725));
#742710=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#742714=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#742717=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#742727=PRODUCT_DEFINITION('design','',#742726,#742723);
#742728=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 30-130.',#742727);
ENDSEC;
END-ISO-10303-21;