ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('30-132','2025-10-01T23:20:43',(''),(''), 'CREO PARAMETRIC BY PTC INC, 2025093','CREO PARAMETRIC BY PTC INC, 2025093','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1037875=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1037877=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#1037876);
#1037878=(CONVERSION_BASED_UNIT('INCH',#1037877)LENGTH_UNIT()NAMED_UNIT (#1037875));
#1037881=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #1037880);
#1037882=(CONVERSION_BASED_UNIT('DEGREE',#1037881)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#1037884=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(9.389448686535E-5), #1037878,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#1037885=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#1037884))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1037878,#1037882,#1037883))REPRESENTATION_CONTEXT('ID1','3'));
#1037887=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#1037888=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#1037887);
#1037889=DESIGN_CONTEXT('',#1037887,'design');
#1037890=MECHANICAL_CONTEXT('',#1037887,'mechanical');
#1037891=PRODUCT('30-132','30-132','NOT SPECIFIED',(#1037890));
#1037892=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #1037891,.MADE.);
#1037896=PRODUCT_CATEGORY('part','');
#1037897=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#1037891));
#1037876=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1037880=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1037883=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1037893=PRODUCT_DEFINITION('design','',#1037892,#1037889);
#1037894=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 30-132.',#1037893);
ENDSEC;
END-ISO-10303-21;